Klimaire KSID022-H215 Instalační manuál

Before using your air conditioner, please readthis manual carefully and keep it for future reference.ROOM AIR CONDITIONER Please read this instal

9Select the location for installation(follow the previousnotes on selecting the installation place).If the outdoor unit is higher thanthe indoor unit,

101. First remove the water tray on the outdoor unit as shown in Fig.20.2. Do not remove the plastic seals from the outdoor unit and the appropr

11Coupling size (last 2 part numbers)Pound-force foot(1bf-ft)Newton meter(N-m)Kilogram-force meter(kgf-m)18 - 2030 - 3545 - 5060 - 6524.4 - 27.140.6 -

12Electrical workELECTRICAL WORKAfter the confirmation of the above conditions, prepare the wiring as follows:1) Never fail to have an individual pow

13Connect the cable between indoorunit and outdoor unit Before performing any electrical work, turn off the main power to the system

Test runningPerform test operation after completing gas leak check at the flare nut connections and electrical safety check. Check that all tubing

Tel: (305)593-8358 Fax (305) 675-2212www.klimaire.com [email protected] NW 89 Place, Doral, FL 33172 - USAThe Klimaire logo is a registered

1CONTENTS Contact an authorised service technician for repair or maintenance of this unit. Contact the authinstaller for installation of this u

2WARNING Read the follow SAFETY PRECAUTIONS carefully before installation. Incorrect installation due to ignoring of the instruction w

3INSTALLATION INSTRUCTIONSSelecting installation placeRead completely, then follow step by step.Indoor unitDo not expose the indoor unit to heat or s

4INSTALLATION INSTRUCTIONS.AccessoriesNote: Except the above parts provided, the other parts needed during installation you must purchase.Fig.3Use

5INSTALLATION INSTRUCTIONSIndoor unit installationFig.4Fig.5Note: 1. Fit the Installation Plate1. Fit t h e i nstalla t i on plate ho r i zontall y

62. Drill a hole in the wall 1. Determine hole positions according to the diagram detailed in Fig.5. Drill one (1) hole (φ90mm/3.54in) slanti

7INSTALLATION INSTRUCTIONS Remember that if they are tightened with too little torque they will leak but if they are tightened with too much

8INSTALLATION INSTRUCTIONSDo not allow the piping to let out from the back of the indoor unit.Be careful not to let the drain hose slack.Heat insulat